AUTOOL ATF602 Automatic Transmission Fluid Exchanger

AUTOOL ATF602 Automatic Transmission Fluid Exchanger

AUTOOL ATF602 Function
1. After working for a long time, automatic transimmison can’t exchange fluid 100%, and it will cause transimmision not work normally.
2. AUTOOL ATF602 Automatic Transmission Fluid Exchanger can pour into fresh oil and clean transimmison, fluid torque converter and transmission radiator in 20 miutes. It can exchange oil 100%.

AUTOOL ATF602 Car Brake Fluid Bleeder

Auto Gearbox Oil Exchange Cleaning Machine

AUTOOL ATF602 Features
1. Clear the metal pieces and oil sludge from automatic transimmison, and exchange the waste oil out from transimmison
2. Recover the accelartion of transmission
3. Decrease transmission vibration and fuel consumption
4. Reduce transmission temperature
5. Extend usage life of transmission

AUTOOL ATF602 Automatic Transmission Fluid Exchanger

Automatic Transmission Fluid Exchanger

Operation Instruction of AUTOOL ATF602
1. Find a ATF cooling circulation pipe which is easy to dismantle, and dismantle the connector.
2. Start the car for a while. One side of the dismantled ATF cooling circulation pipe will inject oil, then you can judge inlet and outlet.
3. Use blue pipe to connect the oil outlet with the side of ATF cooling circulation pipe which does not inject oil.
4. Use red pipe to connect oil return pipe with the side of ATF cooling circulation pipe which injects oil. Connect a ball valve between the red pipe and ATF cooling circulation pipe.
5. Lift the car
6. Put the oil suction pipe into fresh oil bucket.
7. Start the car, shift the geart to make 3-4L waste oil to the waste oil bucket from transmission.
8. Power on the machine: Connect the power cable to 12V power supply. Rotate the emergency switch, you’ll see the indicator lights, then, the machine starts to work.
9. When the machine starts to work, please pour into fresh oil to the transimission. Automatic transmission begin to exchange waste oil to fresh oil. Compare the flow rate between the waste and fresh oil pipe, and the volume between the waste and fresh oil bucket, then, use the ball valve to control the outflow. (If the waste oil recycles faste, it will reduce oil return by turning down the valve)
10. When exchange the oil, shift every gear. Stay in one for about 5-10 seconds.
11. Observe the change of outflow and color in the waste oil tube, and regulate the outflow to meet the need of oil volume for transmission. When the fresh oil flows from the waste oil pipe, the waste oil is fully exchanged. Then, power off the machine.
12. Connect the transmission pipes as they are. Start the car, and shift to P to measure the oil. Then, add ATF oil according to oil level. At the same time, please check if the pipes leak. When the oil is added, drive about 1km to check again (It is very necessary).


Main Unit

Packing list:
1. The machine
2. Oil return pipe, oil inlet pipe
3. Connectors for cars
4. Instruction, certificate

AUTOOL ATF602 Automatic Transmission Fluid Exchanger

Packing List

Safety Precautions and Warnings
1. Please read the instruction before operating the machine
2. Please keep away from fire
3. If you find the machine is damaged during transportation, please complain to shipping company in the shortest time. We promise to pack it well before shipping, but any damage in transportation is out of our control
4. The plastic accessories are not under warranty
5. Please discharge the water in air compressor in 2-3 days, in order to prevent the pump from breakdown. Please keep the machine away from the wet.
6. Keep the machine clean, and place it in a cool place. Do not dry it in the sun.
7. If the machine can’t work properly, please contact your local distributor.

Pulsating Brake Fluid Bleeder Pro1 For Car Truck Motorcycle

Pulsating Brake Fluid Bleeder Pro1 For Car Truck Motorcycle

Pulsating Brake Fluid Bleeder Pro1 Standard Configuration:
1pc * Pro1 Host
1pc * User Manual
1pc * Collection Container (1 Liter)
1pc * E20 Adapter

(Note: E20 Adapter coverage – Benz, BMW, VW, Audi, Skoda, Volvo, Land Rover, Jaguar, Bently, Porsche, Buick, Chevrolet, Ford, Peugeot, Citroen, Chery, CHANGAN, Mazda, BYD, Roewe, Renault, Geely, Zhong Hua, Great Wall, MG, BESTURN, Lexus, Cadillac, etc.)

Pulsating Brake Fluid Bleeder Pro1

Standard Packing List

Operating Principle of Pulsating Brake Fluid Bleeder Pro1:
Brake fluid is taken from its container by a pump operating at up to 3.5 bar pressure and is continuously pumped into the brake fluid reservoir. The individual wheel brake cylinders can then be drained of their used brake fluid until the new brake fluid comes through. You thus avoid the regular emptying and filling operations, in contrast to conventional systems and also avoid any resulting water absorption in the brake fluid. The pump used to fill the brake fluid reservoir is equipped with pressure monitoring. Should it not be possible to build pressure or should the pump pull in air, the pump switches itself off automatically.

Compact Design, Portable
Suitable for Dot 3, Dot 4 and Dot 5.1 Brake Fluid Standard
Mechanical Pressure Control Regulation
Clean and exchange brake fluid of ABS, ESP, EDS and SBC.
Pulsating technique with 50Hz frequency, quick bleeding
Automatically stop working when the container becomes empty, avoid regular emptying and filling.
Adapter via zero pressure plug
Durable German type adapters

Pulsating Brake Fluid Bleeder Pro1 Technical Data:
Model: PRO 1
Max. Container Size: 5.4 Liters
Working Pressure: 0.6 – 3.0 bar
Main Voltage: AC220V 50/60Hz or AC110V 50/60Hz
Filling Hose Length: 3.5m
Dimension in mm: 280 × 260 × 410
Weight: 7.5Kg
Noise: ≦70dB

How important to exchange brake oil
After a long time use, brake fluid will go deteriorated, which will produce precipitation. It will block oil pipe and make brake oil shortage. It may make brake poor. So it is very necessary to exchange brake fluid regularly.


Follow are optional parts, not included in this item

P10 Adapter Kit List & Description (Optional Parts)
1pc * Adapter 1: Coverage same as E20 Adapter, specially for narrow space vehicle
1pc * Adapter 2: Fit for JAC, Hyundai, DFM,KIA, Subaru, Renault,Roewe, Mitsubishi,Infiniti, BAIC BJEV,Nissan
1pc * Adapter 3: Fit for Buick Commercial Vehicle
1pc * Adapter 4: Fit for Ford, Audi, Peugeot,Toyota
1pc * Adapter 5: Fit for Honda
1pc * Adapter 6: Fit for BYD, Honda
1pc * Adapter 7: Fit for Buick, Ford, Mazda, Cadillac
1pc * Adapter 8: Fit for Dodge, Jeep, Chrysler
1pc * Adapter 9: Fit for Dongfeng Fengxing
1pc * Adapter 10: Fit for Nissan
1pc * Quick Female Adapter
2pcs * 8 / 9 / 10 / 11mm Bleeder Screw Wrench

P10 Adapter Kit For Pulsating Brake Fluid Bleeder

P10 Adapter Kit

Pulsating Brake Fluid Bleeder P10 Adapter Kit

P10 Adapter Kit

Universal Adapter of Pulsating Brake Fluid Bleeder Pro1,Applicable beyond P10 Adapter Kit (Optional Parts, Inlet Diameter – 80mm)

Universal Adapter For Pulsating Brake Fluid Bleeder

Universal Adapter

Pulsating Brake Fluid Bleeder & P10 Adapter Kit & Universal Adapter

PRO1+P10 Adapter Kit+Universal Adapter